Vanconol® ALI-1124/910 Corrosion Inhibitor: Corrosion Protection Expert in Aluminum-Magnesium Alloy Processing
Vanconol® ALI-1124/910 Corrosion Inhibitor: Corrosion Protection Expert in Aluminum-Magnesium Alloy Processing
Abstract
This article provides a detailed introduction to the selection of Vanconol® ALI-1124/910 corrosion inhibitors from Tianjin Hi-Perferal Advanced Materials Co., Ltd. for use in aluminum-magnesium and other metalworking fluids. By presenting various application scenarios, it demonstrates the performance of these inhibitors in reducing tool wear, preventing corrosion of aluminum-magnesium alloys, and improving surface finish. The article also highlights the biodegradable nature of Vanconol® inhibitors under increasing environmental regulations, as well as their broad application across industries such as aerospace, automotive manufacturing, and 3C electronics.
With the rapid development of the manufacturing industry, lightweight materials such as aluminum-magnesium alloys are increasingly used in aerospace, automotive manufacturing, 3C electronics, and other fields. However, these alloys are susceptible to corrosion during processing, which affects product quality and service life. To address this challenge, Tianjin Hi-Perferal Advanced Materials Co., Ltd. has leveraged its extensive technical expertise and innovative spirit to launch Vanconol® ALI-1124/910 corrosion inhibitors, providing an efficient corrosion protection solution for aluminum-magnesium alloy processing.
Overview of Vanconol® ALI-1124/910 Corrosion Inhibitors
Vanconol® ALI-1124/910 corrosion inhibitors are high-performance anti-corrosion additives developed by Tianjin Hi-Perferal Advanced Materials Co., Ltd. specifically for the corrosion challenges encountered during the processing of lightweight materials such as aluminum-magnesium alloys. The product forms a dense protective film that effectively isolates the metal substrate from direct contact with the processing fluid, thereby significantly reducing the occurrence of corrosion reactions. In addition, Vanconol® corrosion inhibitors offer excellent extreme-pressure lubrication properties, helping to reduce tool wear and improve processing efficiency and product quality.
Application Scenarios and Selection Guide
Vanconol® ALI-1124/910 corrosion inhibitors are widely used in aluminum-magnesium and other metalworking fluids. The following table provides a recommended selection guide based on different processing scenarios and requirements:
|
Application Scenario
|
Function
|
Recommended Corrosion Inhibitor
|
Recommended Addition (wt.%)
|
Adjust According to Actual Conditions
|
Potential Suppliers / Target Customer Types
|
|
Dedicated cutting fluid for aluminum alloy CNC machining centers
|
Extreme-pressure lubrication, reduces tool wear, prevents aluminum corrosion, improves surface finish
|
3%-5%
|
Yes
|
Aluminum component manufacturers (automotive, 3C electronics), large CNC machining plants
|
|
|
High-precision stainless steel milling fluid
|
Forms lubricating film under high pressure, protects tools, enables mirror-finish results
|
Vanconol® ALI-910; ALI-1214
|
4%-7%
|
Yes
|
Precision instruments, medical devices, kitchenware manufacturers
|
|
Cast iron engine block honing fluid
|
Lubrication, cooling, cleaning; provides inter-stage rust protection; keeps stones clean
|
Vanconol® ALI-910; ALI-1214
|
2%-4%
|
Yes
|
Automotive engine plants, large foundries
|
|
Metal rolling (cold rolling) emulsion
|
Acts as emulsifier and extreme-pressure additive; ensures lubrication between rolls and strip; extends roll life
|
Vanconol® ALI-910; ALI-1214
|
3%-6%
|
Yes
|
Steel cold rolling mills (Baosteel, Ansteel, etc.), rolling oil compound producers
|
|
Copper alloy wire drawing oil
|
Lubrication, wear resistance; provides excellent copper corrosion inhibition, prevents surface discoloration
|
Vanconol® ALI-910; ALI-1214
|
2%-5%
|
Yes
|
Wire and cable factories, electronic connector manufacturers
|
|
Steel structure cutting fluid (centralized supply system)
|
Low-foam properties suitable for centralized supply; lubrication and rust prevention; maintains system stability
|
Vanconol® ALI-910; ALI-1214
|
1%-3%
|
Yes
|
Heavy machinery, engineering machinery manufacturers
|
|
Semi-synthetic cutting fluid (general-purpose)
|
Core multifunctional additive; balances lubricity, emulsion stability, and rust prevention
|
Vanconol® ALI-910; ALI-1214
|
3%-8%
|
Yes
|
Various metalworking fluid formulation plants, blending plants
|
|
Micro-emulsion cutting fluid
|
Helps form stable micro-emulsion; improves lubricity and cleaning; suitable for multiple metals
|
Vanconol® ALI-910; ALI-1214
|
4%-6%
|
Yes
|
High-performance metalworking fluid brands
|
|
Biodegradable eco-friendly cutting fluid
|
Serves as a biodegradable extreme-pressure lubricity component; meets environmental regulations
|
Vanconol® ALI-910; ALI-1214
|
3%-5%
|
Yes
|
Processing plants targeting European markets or emphasizing environmental protection
|
|
Glass cutting and polishing coolant
|
Specialized lubrication; reduces cutting resistance; improves glass processing yield
|
Vanconol® ALI-910; ALI-1214
|
2%-4%
|
Yes
|
Glass deep-processing enterprises, optical glass manufacturers
|
|
Cutting oil for difficult-to-machine materials like titanium alloys and superalloys
|
Synergizes with sulfur and chlorine additives to provide extreme-pressure performance while reducing overall corrosivity
|
Vanconol® ALI-910; ALI-1214
|
5%-10%
|
Yes
|
Aerospace, gas turbine blade manufacturers
|
|
Water-based stamping oil
|
Lubrication, rust prevention; easy to clean; meets environmental and clean production requirements
|
Vanconol® ALI-910; ALI-1214
|
5%-8%
|
Yes
|
Automotive body panels, appliance housing stamping plants
|
|
Aluminum foil rolling oil
|
Lubrication and cooling for ultra-thin rolling; ensures aluminum foil surface quality
|
Vanconol® ALI-910; ALI-1214
|
2%-4%
|
Yes
|
Aluminum foil producers (e.g., air conditioner fins, food packaging foil)
|
|
Centralized grinding fluid
|
Low-foam, good settling; keeps grinding wheels sharp; achieves good workpiece surface
|
Vanconol® ALI-910; ALI-1214
|
2%-4%
|
Yes
|
Bearing, gear precision grinding plants
|
|
Rust-preventive emulsified oil
|
Enhanced rust prevention after amine neutralization; formulated as inter-stage rust-preventive fluid
|
Vanconol® ALI-910; ALI-1214
|
3%-5%
|
Yes
|
Machining plants, component storage centers
|
|
Single-machine emulsified fluid
|
Good stability; strong hard water resistance; long service life
|
Vanconol® ALI-910; ALI-1214
|
3%-5%
|
Yes
|
Small to medium-sized machining workshops
|
|
Metal cleaning agent
|
Acts as a surfactant with combined lubrication and rust prevention; used for one-step cleaning + rust prevention
|
Vanconol® ALI-910; ALI-1214
|
2%-5%
|
Yes
|
Metal pretreatment, painting pretreatment suppliers
|
|
Anti-wear hydraulic oil for hydraulic and lubrication systems
|
Acts as anti-wear additive; reduces wear in hydraulic pumps
|
Vanconol® ALI-910; ALI-1214
|
1%-3%
|
Yes
|
Hydraulic oil, lubricating oil blending plants
|
|
Steel sheet phosphating pretreatment fluid
|
Lubrication, surface cleaning; improves uniformity of phosphating film
|
Vanconol® ALI-910; ALI-1214
|
1%-2%
|
Yes
|
Paint lines, surface treatment plants
|
|
Aluminum alloy mobile phone middle frame processing fluid
|
High surface finish; effectively prevents aluminum corrosion and blackening; extends tool life
|
Vanconol® ALI-910; ALI-1214
|
